Huot Combination index holds 115 stub length drill bits including 1/16" to 1/2" in 1/64 increments A to Z and #1 to #60 sizes

The original metal drill index was invented by Huot Manufacturing and are still made in the USA. These handy all-steel drill index cases are designed to hold the drill securely by the shank to help protect cutting edges. Each panel folds into the box like the pages of a book making them compact enough to easily fit in a standard toolbox drawer. Each size is permanently identified with raised characters for easy reading and the decimal eqivalent is provided as well.

  • Original design all-steel case cover and drill holder panels

  • Decimal eqivalents permanently embossed for each size bit

  • Permanent-raised characters for easy reading and won't wear off from the fractional and letter sizes. Wire gauge sizes are identified with wear resistant mylar label.

  • Made in the USA



More detail ...

Irwin Industrial Tools 3018002B Cobalt M-42 Metal Index Drill Bit Set with Case 29-Piece

Manufacturer:Hanson

Features and Benefits:

Contains the following drill bit sizes: 1/16 in. 5/64 in 3/32 in. 7/64 in. 1/8 in. 9/64 in.5/32 in. 11/64 in. 3/16 in. 13/64 in. 7/32 in. 15/6 in. 1/4 in. 17/64 in. 9/32 in. 19/64 in. 5/16 in. 21/64 in. 11/32 in. 23/64 in. 3/8 in. 25/64 in. 13/32 in. 27/64 in. 7/16 in. 29/64 in. 15/32 in. 31/64 in. 1/2 in.

  • Cobalt Steel - extended cutting edge life maintains cutting life after resharpening
  • Extra hard drill for greater wear
  • 135 degree Split Point Tip - start on contact. Cuts with less force.
  • Supercedes HAN63138


  • Cobalt steel extends cutting edge life and maintains cutting life after resharpening

  • Extra hard drill for greater wear

  • 135-Degree split point tip starts on contact cuts with less force

  • Reduced shank above 3/8-Inch allows the use of larger drill bits in a 3/8-Inch chuck

  • Rubber overmolded case protects kit if dropped



More detail ...

General Tools WBGT8758 Deluxe Heat Index Monitor

An industry breakthrough for outdoor sports designs to monitor heat conditions. Four measurement parameters: WBGT (Wet Bulb Globe Temperature) TG (Globe Temperature) TA (Air Temperature) % (Relative Humidity). Includes: 2 AAA Batteries. Black ball size: Dia. 40mm Height 35mm. Temp.(TG) range: 32 to 122F (0 to 50C). Temp.(TG) accuracy: +/-2F (+/- 1C). WBGT Temp.range: 32 to 122F (0 to 50C).

  • Sports medicine and HVAC uses

  • Power of sunlight factored into heat index

  • Range 32 to 122F

  • Measures wet bulb globe tempair temp relative humidity

  • Ideal for outdoor sports



More detail ...

Skil 2867-02 18-Volt Cordless Drill with Bit Index

Variable speed/reversing with electronic brake. 3/8" keyless chuck. Six torque settings. Bit size indicator accurately matches drill bit to screw size. Stores two screwdriver bits. Soft grip for comfort and control. STANDARD EQUIPMENT: Battery ch arger carrying case double ended bit bit size indicator. SPECIFICATIONS: 18 volt no load RPM 700/min 3/8" keyless chuck. cULus Certification

  • Bit Size Indicator

  • 3/8-Inch Keyless Chuck

  • 6 Torque Settings

  • Variable Speed/ Reversing with Electronical Brake

  • Soft Grip



More detail ...

Steelex Plus D1138 115 Piece HSS Tin Drill Bit Set in Index

Titanium nitride coated bits last up to six times as long as uncoated bits. 115-piece set features 29 fractional bits from 1/16" to 1/2" in increments of 1/64" letter bits from A to Z and 60 number bits. Housed in rugged steel case.[]More detail ...

Bosch CO4029 Cobalt Twist Drill Bit Assortment with Metal Index 29-Piece

Bosch CO4029 29 Piece Cobalt Drill Bit Sets

  • Resists up to 1100 degrees F in extra-hard materials

  • 135 degree split point starts on contact no walking or skating



More detail ...

Irwin Industrial Tools 3018004 Black Oxide Metal Index Drill Bit Set with Case 29-Piece






  • Oxide treatment resists corrosion helps prevent bit from rusting

  • 135-Degree split point tip starts on contact cuts with less force

  • Reduced shank above 3/8-Inch allows the use of larger drill bits in a 3/8-Inch chuck

  • Rubber overmolded case protects kit if dropped

  • Tap and Drill selection chart for convenient reference.



More detail ...

My Blog List